LG TV Error Code 7 | Causes & Solutions

Are you getting Network Error Code 7 while using streaming apps like Hulu on LG TV? No need to worry. Outdated TV firmware and poor network connectivity are the key reasons for this error to appear. To get rid of such error messages on LG TV, you can carry out the following troubleshooting methods to fix it instantly.

Reasons for LG TV Error Code 7

Error code 7 will appear on your LG TV, due to the following reasons.

• If you haven’t updated the LG TV firmware
• Problems with your WiFi network or router
• If an external cable is not plugged properly
• Technical issues with your LG TV
• Incorrect network settings
• If an app is incompatible with the TV

Fixes for Error Code 7 on LG TV

Here are useful workarounds that will help to fix the error code 7 on LG TV.

• Check the Network Status and Connection
• Restart the WiFi Router or Modem
• Connect LG TV to a Different Network
• Turn off Quick Start+ and Simplink Feature
• Remove the External Devices
• Reset DNS Settings
• Update your LG TV
• Reset your LG TV
• Contact Support

Check the Network Status and Connection

You have to check your network status if you face any error codes regarding internet connectivity issues. Error codes like 105, 201, 6003, 0204, 25, and so on are caused mainly due to unstable internet connection.

1. Press the Home button on your LG TV remote.

2. Now, you will enter the home screen on your LG TV.

3. From the home menu, click on the Settings icon and select All Settings.

4. Choose Network from the General Settings.

5. Then, click on the connection type that you established on your LG TV.

6. Now, you can see the entire network status of your LG TV.

Note: Make sure to run an internet speed test on the LG TV to find out whether the bandwidth is low.

Restart Router or Modem

If you find that the issue is with your router, you have to restart it immediately to solve this issue. Initially, plug the power cable of your router. Your router will shut down immediately. Wait for a few minutes. After that, plug the cable back into the router and turn it on. When your router restarts, connect it to your LG TV. Check whether your LG TV is receiving a good internet connection.

Some router models have a reset button under them. You can also press that to reset your router completely.

Connect LG TV to a Different Network

You may also experience the error code 7 if your current WiFi connection is having any technical glitches. Try to connect to a different internet connection. This might solve the issue on your LG TV.

1. Open the Quick Settings Menu on your LG Smart TV.

2. Click on the Network Settings from the options.

3. Select WiFi Connection from the current screen.

4. Turn it on using your remote controller.

5. Now, turn on the WiFi connection.

6. You can see the list of available network connections.

7. From that, choose the connection to which you want to connect.

8. Enter the password and it will be connected within seconds.

After switching to a new WiFi network, open any app on LG TV and check if the issue has been fixed or not.

Disable Quick Start+ and Simplink Feature

Quick Start+ reduces the startup time of your TV. Simplink on LG TV enables your TV to control all HDMI-connected devices using a single remote. Turning off these features might clear the error code 7 on your LG TV.

Turn Off Simplink on LG TV

1. Press the Settings button on your LG TV remote.

2. You can also get into the home screen on your LG TV and click on the Settings icon that is available at the top-right corner of the screen.

3. From the settings menu, click on General Settings.

4. Select Simplink. Toggle it off and the Simplink feature will turn off immediately.

Turn Off Quick Start+

1. Click on the Settings icon that is available at the top-right corner of the screen. Alternatively, you can press the Settings button on your LG TV remote.

2. From the set of options, click on All Settings.

3. Choose the General Menu from the left on the settings page.

4. Under Quick Start +, turn off the function.

Reset DNS Settings

DNS settings often cause app issues and other error codes on your LG TV. You may see that the applications may stop working or the home launcher may refuse to open on LG TV. Resetting the DNS address on your LG TV may solve the error code 7 on your LG TV.

1. Press the Home button on the remote or TV.

Tip: If the Home button is not working on the LG TV, you can fix it with some tricks.

2. Now, click on the Settings icon that is available at the top-right corner of the screen.

3. Select All Settings from the options. It will be displayed as a three-dotted icon.

4. Click on Network and select WiFi Connection.

5. After that, select Advanced WiFi Settings.

6. Click on the Edit option that is available at the bottom of the screen.

7. Now, check in Set Automatically.

8. Select the DNS Server and enter the address manually.

Update your LG TV

You can update your LG TV firmware manually and automatically. If you want to update manually, you must use a USB drive to install the firmware from the other PC and transfer it to your LG TV. But keep in mind that the process is very long. Hence, you can update your LG TV automatically with a few simple steps.

Update WebOS

1. Click the Settings icon on the LG TV home screen.

2. You will see a set of options appearing on the side of your TV.

3. From those options, click on All Settings.

4. Now, click on General from the menu.

5. After that, choose About this TV and select Check for Updates.

6. If any updates are available to your TV, you can install it now or schedule it later.

7. Once the newest version is installed successfully, your TV will reboot automatically.

Update Netcast OS

Those who have older LG TV models with NetCast OS, try these steps.

1. Click on the Settings icon on your LG TV home screen.

2. Select All Settings from the options.

3. Choose Support from the settings page.

4. Click on Software Update.

5. Select Check Update Version.

6. If any updates are available, click download and install on your LG Netcast TV.

Reset LG TV

When you reset your LG TV, all the login details and settings will be restored to their defaults. This will also solve the error code that you are experiencing on your LG TV.

1. Press the Smart or Home button on your LG TV remote.

2. Now, click the Settings icon at the top of your screen.

3. From the settings page, click on General.

4. Locate Reset to the Initial Settings and click it on.

5. Confirm the process by clicking on OK.

Contact LG Support

If you find that no option is working to solve the error code 7 on your LG Smart TV, you can contact the LG Support Center. For convenience, you can ring the toll-free number 1800 315 9999 to speak to a customer support agent. Then follow the necessary guidelines to fix the issue by yourself.

Frequently Asked Questions